The majority of interior elements are manufactured using diamond direct cutting, which allows for the fast and mass production of similar products, such as squares of strip, or cutting square tiles into rectangular tiles for wall tiling.
For sawing off the end part of the tile at the junction of two slabs at the corners of the vertical surface is used diamond cutting at an angle of 45 degrees, also used in facing columns, slopes and external corners, will get rid of the need to search for analogs of plastic or metal.
Water Jet (Water Jet, Hydrojet) is used for the production of parts with complex contours of any size. It is a universal, but more expensive technology compared to diamond cutting.
Thanks to the Hydrojet technology it is possible to cut a hole in porcelain stoneware, this service is used when it is necessary to cut a hole in porcelain stoneware for a decorative element, for example for a socket, washbasin, fireplace.
Porcelain stoneware panels can contain elements with rounded, monogrammed, oval or straight details. These panels are cut using a waterjet cutting machine. The size of the panels is not limited in dimensions.
The cutting of large-format slabs from 1200 mm in size is performed by straight cutting with a diamond disc on equipment with a large-format bed and table.
In cases where two boards are joined at the corners of a vertical surface, a 45 degree cut is used. In the case of a large slab, this allows for elegant corner wall cladding in both external and internal corners of rooms from floor to ceiling.